Pluto outdoor spa

Dimensions: L: 190 cm x B: 190 cm x H: 90 cm.
Facilities: 1 sofa beds and 4 seats
Colour: White with outside insulation
Cabinet colour: Grey
Stand: Stainless steel (304)
Base plate: ABS bottom with foil
Tub: Acrylic from the American manufacturer Aristech
Water volume: About 850 liters
Weight: 290 kg

WARNING!

Turn off the power before refilling and replacing water in the spa. The heater must NEVER run without water in the spa, otherwise it will overheat and break down. An overheating of the heater is NOT covered by the warranty. 

There should at least be access to service spa:
On the long side where the keyboard is located
On the right side seen from the keyboard side as there is a jet pump located there.
Both sides must be removable in full width.

Insulation:

The underside of the tub: 2-3 cm. foam insulation.
The sides: 5 cm insulation on 3 sides, Service cover; 3cm. All insulation is reinforced with heat-reflective foil.
Heat insulating top cover: Foamed polystyrene approx. 15 cm (Extra strong). Color Slate.

Control panel: Balboa or Gecko with frost protection, and financial control
Heater: 3 kW with thermostat control
Circulation pump: 1 pc. (180 W)
Jet pumps: 1 pc. 3 hp
Number of nozzles: 34 pc. stainless
Number of neck pads: 3 pc.
Light: 12 LED Lights with 7 colors
Ozonator: Yes
Filters: 2 slats
Connection: 400 V 16 A | Connected with a 5 pole CCE MALE connector 
Information for Electrician: Bring a 5 pole CCE FEMALE plug

Balboa User Guide

Plumbing drawing