Model with WIFI control application from your cell phone and energy savings of up to 20% compared to the normal heat pump with on/off function.
Incl. winter cover and WIFI control via mobile app.
Popular model with COP value up to 8.0 and Japanese inverter technology that allows energy savings up to 20% compared to normal heat pumps with on / off function. Possibility of WIFI control via app directly from your cell phone, with “Quiet”, “Smart” and “Powerful” settings.
Instead of completely stopping the compressor when the desired temperature is reached, the flexible inverter control constantly monitors the operating frequency of the compressor. This achieves optimal, energy-efficient operation while eliminating energy loss in connection with many starts and stops. Extra low noise level of 42 dBA.
Metal enclosure available. Low temperature down to -12°C makes it ideal for the Nordic climate. Heat exchanger made of titanium and Toshiba compressor. Adapters are included for easy and glueless installation of pool hoses in sizes 50/38/32 mm.
Perfect for your pool and spa.
7 year warranty on compressor, 2 year warranty in total.
Defective machines are covered by warranty and will be replaced with new ones.
Compressor type: Inverter
Minimum water quantity in operation: 4.000 liter/our
Max. water pressure drop kPa: 15
Refrigerant type: R32
CO2 equivalent tons : 0,68
Fan / type / speed RPM: 1 / Horizontal / 500-850
Capacity in air 15 ° / water 26 ° / humidity 70% * kW: 9.5-2.2
Power consumption in air 28 ° / water 28 ° / humidity 80% * kW: 2.26-0.2
Power consumption in air 15 ° / water 26 ° / humidity 70% * kW: 2.07-0.31
Ratios between input power and extracted thermal energy (COP):
COP in air 28 ° / water 28 ° / humidity 80% * kW: 16-6.2
COP in air 15 ° / water 26 ° / humidity 70% * kW: 7.2-4.6
Volume (which can be heated):
Maximum pool volume m3: 70
Recommended pool volume m3: 18-66
Noise at a distance of 10 meters dB (A): ≤38
Noise at a distance of 1 meter dB (A): 38-48
Net dimensions L / W / H mm: 1072x449x696
Gross dimensions L/W/H mm: 11120x479x837
Net/Gross weight kg: 78/83
A more advantageous heat
Connection to an external heat source.
The spa can be equipped with a connection to an external heat source. This heat source can be in the form of a heat pump, a solar heating system, a stove or similar. However, you can only use the built-in heater. Of course, a non-electric heat source reduces the spa’s electricity consumption, whereas, for example, a heat pump provides more heat relative to electricity consumption than a heater. In addition, more heat means faster heating.
Using a heat pump
If you want to save on electricity consumption, you can use an air-to-water heat pump to heat water. Compared to a water heater, the heat pump provides more heat per kW of electricity than the water heater. The heat pump can be used to easily heat the outdoor spa, while the heater built into the hot tub helps adjust the heat level when the tub is in use.
NordKap living sells the outdoor spa heat pump in two different sizes: 5.5 kW and 10.5 kW.