Large chlorine tabs, 50 pcs

1 kilo of chlorine tablets for outdoor spas. 20 g/tablet with 90% active chlorine. Use in skimmer or dosing container.

Good water quality requires regular, careful care. Therefore, dose accurately and only use compatible products.

An extra splash in everyday life can do more harm than good, as high water quality is a fine balance between the water parameters and the care products used.

The tablets dissolve slowly and are stabilized and lime-free. The stabilization includes the water's free chlorine content and pH value, making it easy to maintain good water quality.

This product is not suitable for shock chlorination.

Before use, check the pH of the water and lower it to 6.8-7.2* if necessary. Place 1 tablet in the chlorine dispenser for every 1000 liters of water. Chlorine is released from the tablet at a rate corresponding to a consumption of 0.8 – 2 mg/liter.

Add an extra tablet at startup, high sun exposure or high bathing load.

*According to the Executive Order on swimming pool facilities etc. and their water quality, Appendix 1, the pH value should be between 6.8 and 7.0. The value must not be below 6.8 and never above 7.6. Water in Denmark is calcareous, and therefore has a relatively high pH value. The use of pH-increasing agents should not be necessary. You can optionally replace some of the water with tap water.

Handling and storage

Chlorine tablets require care when handling and storing. Use plastic/rubber gloves and only open in a well-ventilated area or outside.

Keep out of reach of children and away from food. Store in a well-ventilated area and away from direct sunlight. Do not expose to heat. Do not store with strong reducing agents or acids.