Automatic water filling

Level control that controls the water level in your spa, ensuring there is always enough water and the tub does not overfill.

Two sensors are glued to the tub where the maximum and minimum water levels are to be measured (see instructions).

Via a solenoid valve (not included), the water supply is closed and turned off when the individual sensors are activated.

In a spa that is fitted with automatic water filling, the primary power supply is moved from the control box to the water filling control unit.

At the same time, the water filling must be turned on/off with a pneumatic push button located on the side of the spa.

For new spas only

The price for this module is for installation at our workshop together with a newly purchased spa. If you wish to purchase the module for an older spa, a service module must be added to the price. Call for a quote.

If the automatic water fill is installed in an older spa, the external power supply must be moved from the control box to the automatic water fill control unit.

What is included in the price?

The SPA company installs the unit and sensors, as well as a 3/4 inch male T-piece, which is installed in the piping system to the nozzles. The automatic water filling is also connected to the control box.

Your plumber connects the T-piece to the water supply with a solenoid valve (3/4 inch NC 230V.). The plumber supplies the solenoid valve and the pipe that connects it to the T-piece. If there is a local requirement, he also supplies a non-return valve and possibly a dirt filter.

Your electrician connects 400V to the automatic water filling and connects the box to the solenoid valve (see instructions).

This product does not contain automatic dispensing.

Automatic draining can be done using a 2-way solenoid valve, which is, for example, turned on by a timer-controlled switch.