Quick chlorine granules, 5 kg

For disinfection of pool water.

The pool water must have a chlorine content of 1-3 mg/l and a pH value between 6.8 – 7.2*.

Dosage:

When starting up and shock chlorination: Add 75 grams of Klor Quick granules per 10,000 liters of water (10m3).

Alternatively, add 20-30 grams of Chlorine Qiuck per 10,000 liters of water every 2-3 days.

Procedure:

Fill a bucket with water. Then dissolve Klor Quick granules in the water. Always fill the bucket with water first.

Then slowly add the solution along the pool edge or in front of the inlet nozzles while the pump is running.

Warning: Mixing different chlorine products can lead to violent reactions and explosions. Never mix with other chemicals! Use biocidal products safely.

Contents:

Troclosene sodium. Active ingredient: troclosene sodium 100%.

Keep out of reach of children.

Very toxic with long lasting effects to aquatic organisms. Avoid release to the environment.

Harmful if swallowed. Causes serious eye irritation. May cause respiratory irritation.

Wear eye protection. If eye irritation persists: seek medical attention.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Warning: Do not use in conjunction with other products. Hazardous gases (chlorine) may be released. Develops gas on contact with acid.

Download safety data sheet

*According to the Executive Order on swimming pool facilities etc. and their water quality, Appendix 1, the pH value should be between 6.8 and 7.0. The value must not be below 6.8 and never above 7.6. The water in Denmark is calcareous, and therefore has a relatively high pH value. The use of pH-increasing agents should not be necessary. You can optionally replace some of the water with tap water.