Spacare Descaler / Limescale remover 2.5 kg

SpaCare Descaler is a concentrated descaler for gentle descaling of outdoor and indoor hot tubs. 2.5 kg is enough for 200 liters of water.

Periodic descaling is important for continued protection, especially of the spa's heater and pump.

For spas: empty the spa and refill with tap water. NOTE: Use only in non-chlorinated water. A combination of SpaCare Descaler and chlorinated water may produce dangerous gases.

When the bath is filled with clean water, start the circulation and add 1.25 kg of SpaCare Descaler per 100 liters of water.

For a spa with approximately 1000 liters of water, such as Hawaii, 12.5 kg of SpaCare Descaler or 5 buckets are required.

After using SpaCare Descaler, the pH value drops sharply. Therefore, before discharging the water to the sewer, you should raise the pH value to 6.0-7.0 with, for example, pH Up, item number 7079.

Fill the spa with fresh water and add your usual disinfectant (chlorine, chlorine-free or salt) before using the spa again.