Spa protection

Magic Shield is an invisible cover that leaves the surface with the same transparency, texture and appearance. The coating protects by binding microscopic pores to the surface at the monomolecular level. Soaps and other solvents which can usually be used without damaging the surface, cannot penetrate the coating. Treatment should be repeated at regular intervals as the effect diminishes.

Use Magic Shield according to the instructions and it will last up to 100 sqm per. liters depending on the porosity and structure of the surface. Apply the product in a shaded area and make sure the glass surfaces are cool.

Thoroughly clean the surface with an alcohol-based solvent for oils, wax, silicone, etc. before application. Make sure the surface is left completely dry!

1. Use a microfibre rag. Apply the agent to the microfiber cloth, making sure it does not drip.

2. Apply a thin layer on the surface in cross pattern (horizontal and vertical).

3. Let the product work for 1-2 minutes until the surface becomes slightly dull. Then wipe and polish the surface with a dry fabric (possibly wash the surface with clean water and allow it to air dry). Can also be used outdoors.

The product can also be applied using a spray bottle. Spray the product on the surface and follow the instructions above.